You are here: Home » News » What is the complete list of AWS A5.25 / A5.25M types?

What is the complete list of AWS A5.25 / A5.25M types?

Views: 0     Author: Site Editor     Publish Time: 2026-11-20      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

AWS A5.25 / A5.25M: The Complete Classification Guide for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding

What Is AWS A5.25 / A5.25M and What Does It Cover?

AWS A5.25/A5.25M is the American Welding Society specification titled “Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding.”
It prescribes the requirements for classification of fluxes and solid and composite metal cored electrodes for electroslag welding (ESW).
The requirements for electrodes include the chemical composition of the electrode for solid electrodes and of the weld metal for metal cored electrodes.
Requirements for fluxes include the mechanical properties and soundness of weld metal taken from a groove weld made with a particular electrode using a prescribed welding procedure.
Standard electrode sizes, marking, and packaging requirements are also included.
The current edition is AWS A5.25/A5.25M:2023, the 4th edition, which revises ANSI/AWS A5.25/A5.25M-97 (R2009).
The specification makes use of both U.S. Customary Units and the International System of Units (SI), with each system to be used independently of the other.
The specification is also adopted as ASME SFA-5.25 and appears in Section II, Part C of the ASME Boiler and Pressure Vessel Code.
Always verify specific classification requirements with the latest edition of A5.25/A5.25M.

What is the scope of AWS A5.25/A5.25M?

AWS A5.25/A5.25M covers carbon and low-alloy steel electrodes (both solid and composite metal cored) and fluxes for the electroslag welding process.
Electroslag welding is a vertical welding process in which the heat for melting the filler metal and the base metal is generated by the resistance of a molten slag bath, rather than by an electric arc.
The specification addresses the classification of both the electrode and the flux, recognizing that the performance of an electroslag welding consumable depends on the combination of the electrode and the flux.
For carbon and low-alloy steel electrodes and fluxes for submerged arc welding, the applicable standards are AWS A5.17/A5.17M and AWS A5.23/A5.23M respectively.

How are AWS A5.25 electrodes and fluxes classified?

AWS A5.25 uses a combined classification system in which a flux and electrode are designated as a matched pair.
The flux designation begins with the letter “F” followed by a two-digit number indicating the minimum tensile strength of the weld metal in units of 10 ksi, and a letter indicating the condition of heat treatment (“A” for as-welded or “P” for post-weld heat treated).
The electrode designation follows a hyphen and uses the same “E” prefix for solid electrodes and “EC” prefix for composite metal cored electrodes as other AWS filler metal specifications.
An example of a complete flux-electrode designation from the standard is FESXX-XXX, where the electrode classification used is indicated after the hyphen, such as EM5K-EW.
This combined classification approach ensures that the electrode and flux are evaluated together, reflecting the interdependent nature of electroslag welding consumables.

What is the difference between solid and composite metal cored electrodes in A5.25?

Solid electrodes are homogeneous wires with a uniform chemical composition throughout the cross-section, and they are classified based on the chemical composition of the electrode itself.
Composite metal cored electrodes are tubular wires containing metallic powders within a metallic sheath, and they are classified based on the chemical composition of the undiluted weld metal taken from an ingot, rather than the electrode itself.
Both electrode types can be used in any combination with the six fluxes classified under the specification, providing flexibility in matching electrode and flux to the specific application requirements.


What Is the Complete List of AWS A5.25 / A5.25M Types?

The AWS A5.25/A5.25M classification list comprises electrode classifications and flux classifications for electroslag welding of carbon and low-alloy steels.
The electrode classifications identified in the standard and related references include the EM5K series, such as EM5K-EW, along with other solid and composite metal cored electrode designations.
The flux classifications are designated with the “F” prefix followed by a tensile strength code and a heat treatment letter, combined with the electrode designation with which the flux is classified.
The standard classifies six fluxes for use with both solid and composite metal cored electrodes.
For the complete and authoritative list of classifications in the current edition, always verify with the latest edition of A5.25/A5.25M, as the 2023 edition represents a significant revision of the previous 1997 edition.

Which electrode classifications are included in AWS A5.25?

The electrode classifications in AWS A5.25 include solid electrodes and composite metal cored electrodes.
The specific electrode designations referenced in the standard include EM5K-EW and other designations that follow the AWS A5.17/A5.23 electrode classification conventions, such as EL, EM, and EH series for solid electrodes and EC series for composite metal cored electrodes.
The exact electrode classifications available in the current edition should be verified with the latest edition of A5.25/A5.25M, as the 2023 edition may include revisions to the electrode classification system.

Which flux classifications are included in AWS A5.25?

The flux classifications in AWS A5.25 are designated with the “F” prefix followed by a tensile strength code, a heat treatment letter, and the electrode designation with which the flux is classified.
The standard classifies six fluxes for use in electroslag welding applications.
Flux classifications are based on the mechanical properties and soundness of the weld metal produced with the flux and a particular electrode using a prescribed welding procedure.
Examples of flux-electrode designations follow the pattern FESXX-XXX, where the “F” indicates flux, the following digits indicate the minimum tensile strength, and the electrode classification follows the hyphen.
For the complete list of flux classifications in the current edition, always verify with the latest edition of A5.25/A5.25M.


What Are the Chemical Composition Requirements for AWS A5.25 Electrodes?

AWS A5.25 specifies chemical composition requirements for both solid electrodes and the undiluted weld metal produced by composite metal cored electrodes.
For solid electrodes, the chemical composition of the electrode itself is controlled, including carbon, manganese, silicon, phosphorus, sulfur, and other elements within specified maximum or range limits.
For composite metal cored electrodes, the chemical composition of the undiluted weld metal taken from an ingot is controlled, reflecting the combined contribution of the sheath and the core powders.
These requirements ensure that the weld deposit achieves the intended mechanical properties and soundness for electroslag welding applications.
The exact composition limits for each classification are provided in the standard and should be verified with the latest edition of A5.25/A5.25M.

What are the typical carbon and manganese ranges for solid electrodes?

The chemical composition requirements for solid electrodes in AWS A5.25 follow the general conventions of carbon and low-alloy steel filler metal specifications.
Carbon content is typically controlled within ranges suitable for electroslag welding, which generally requires lower carbon levels to minimize cracking in the large, slow-cooling weld pools characteristic of the process.
Manganese content is controlled to provide adequate deoxidation and strength while maintaining weldability.
The specific carbon and manganese ranges for each electrode classification should be verified with the manufacturer’s datasheet and the latest edition of A5.25/A5.25M.

What are the composition requirements for composite metal cored electrodes?

Composite metal cored electrodes in AWS A5.25 are classified based on the chemical composition of the undiluted weld metal taken from an ingot.
This approach ensures that the classification reflects the actual weld metal composition produced by the combination of the metallic sheath and the alloying powders in the core.
The composition requirements control carbon, manganese, silicon, phosphorus, sulfur, and other elements in the undiluted weld metal.
The exact composition limits for composite metal cored electrodes should be verified with the latest edition of A5.25/A5.25M.


What Are the Mechanical Properties of AWS A5.25 Electrode-Flux Combinations?

The mechanical properties of AWS A5.25 electrode-flux combinations are determined by tensile and impact tests of the weld metal produced under specified conditions.
The flux designation encodes the minimum tensile strength: the two-digit number in the “F” designation indicates the minimum tensile strength in units of 10 ksi.
Typical tensile strength values for electroslag welding consumables range from approximately 70 ksi (480 MPa) to 90 ksi (620 MPa) or higher, depending on the specific electrode-flux combination.
Impact toughness requirements are also specified, with testing performed at temperatures appropriate for the intended service conditions.
The exact mechanical property requirements for each combination should be verified with the latest edition of A5.25/A5.25M.

What tensile strength is typical for AWS A5.25 classifications?

The tensile strength of AWS A5.25 electrode-flux combinations is encoded in the flux designation.
A designation beginning with “F7” indicates a minimum tensile strength of 70 ksi (480 MPa), while “F8” indicates 80 ksi (550 MPa), and “F9” indicates 90 ksi (620 MPa).
Electroslag welding is often used for thick-section welding of carbon and low-alloy steels, where the required tensile strength matches the base metal properties.
The specific tensile strength requirements for each electrode-flux combination should be verified with the manufacturer’s datasheet and the latest edition of A5.25/A5.25M.

What impact toughness is required for electroslag welding consumables?

Impact toughness requirements for AWS A5.25 electrode-flux combinations are specified as part of the flux classification.
Testing is performed using Charpy V-notch specimens taken from the weld metal, with minimum energy values specified at designated test temperatures.
The test temperature and minimum energy requirements vary by classification and are typically selected based on the intended service conditions of the welded component.
The exact impact toughness requirements for each combination should be verified with the latest edition of A5.25/A5.25M.


What Is the Difference Between AWS A5.25 and AWS A5.26?

AWS A5.25 and AWS A5.26 are closely related specifications that cover different but similar welding processes.
AWS A5.25/A5.25M covers carbon and low-alloy steel electrodes and fluxes for electroslag welding (ESW), in which the heat is generated by the resistance of a molten slag bath and the process is generally vertical.
AWS A5.26/A5.26M covers carbon and low-alloy steel electrodes for electrogas welding (EGW), a process that uses an electric arc to establish and maintain the weld, with the weld pool retained by water-cooled shoes.
The two specifications are complementary, and both address welding processes used for vertical or steeply inclined joints in thick-section carbon and low-alloy steels.
Consumables classified under one specification are not interchangeable with those classified under the other without careful verification.

What is AWS A5.26/A5.26M?

AWS A5.26/A5.26M is the American Welding Society specification titled “Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding.”
It prescribes the requirements for classification of solid and composite (flux cored and metal cored) electrodes for electrogas welding.
The current edition is AWS A5.26/A5.26M:2020, which revises the previous 1997 edition.
Electrogas welding is used for vertical welding of thick-section carbon and low-alloy steels, particularly in shipbuilding, storage tank construction, and structural fabrication.
The specification is also adopted as ASME SFA-5.26.

When should A5.25 be selected over A5.26?

AWS A5.25 should be selected when the welding process is electroslag welding, in which the heat source is the resistance of a molten slag bath rather than an electric arc.
Electroslag welding is typically used for very thick sections (generally 1 inch and above) and produces a weld with a wide heat-affected zone and a coarse grain structure that may require post-weld heat treatment.
AWS A5.26 should be selected when the welding process is electrogas welding, which uses an arc and is suitable for somewhat thinner sections than electroslag welding.
The selection between the two specifications depends on the specific welding process to be used, which is determined by the joint design, section thickness, and applicable code requirements.


How Do I Choose the Right AWS A5.25 Classification?

Selecting the right AWS A5.25 classification begins with a clear understanding of the base metal composition, the required tensile strength, the impact toughness requirements, the section thickness, and the applicable welding code.
The first step is to determine the minimum tensile strength required for the application, which is encoded in the flux designation’s two-digit number.
The second step is to match the electrode chemistry to the base metal, selecting a solid or composite metal cored electrode that produces weld metal with the appropriate composition and properties.
The third step is to verify that the electrode-flux combination has been qualified for the specific welding procedure and that the combination is classified under the applicable code.
Because electroslag welding consumables are always classified as matched electrode-flux pairs, the selection process must consider both components together.
Always verify the electrode and flux selection with the applicable code requirements and the manufacturer’s recommendations.

What is the decision framework for selecting an AWS A5.25 classification?

The first step is to identify the base metal composition and the required tensile strength of the weld metal.
The second step is to determine the impact toughness requirements based on the service conditions and applicable code.
The third step is to select a qualified electrode-flux combination that meets these requirements, verifying that the combination has been classified under AWS A5.25 and the applicable ASME SFA-5.25 designation if required.
The fourth step is to confirm that the welding procedure, including preheat, interpass temperature, and post-weld heat treatment, is suitable for the selected consumable combination and the base metal.
For critical applications, procedure qualification testing should be performed to confirm that the selected electrode-flux combination meets all mechanical property requirements.

What are the ASME F-Number and A-Number designations for AWS A5.25 classifications?

The ASME F-Number is a grouping of filler metals based on their welding characteristics and usability, used in welding procedure qualification under ASME Section IX.
Electroslag welding electrodes are generally grouped under the same F-Number categories as submerged arc welding electrodes, typically F-Number 6 or F-Number 7 in ASME Section IX, QW-432.
The A-Number is a grouping based on the chemical composition of the deposited weld metal, used for procedure qualification of ferrous materials.
For AWS A5.25 electrodes, the A-Number corresponds to the manganese and silicon content of the weld metal, following the same conventions as other carbon and low-alloy steel filler metals.
The exact F-Number and A-Number assignments should be verified with the latest edition of ASME Section IX.


AWS A5.25 is part of a broader family of AWS filler metal specifications for carbon and low-alloy steel, and it is closely related to specifications covering other welding processes used for thick-section joining.
Understanding these related standards helps ensure that the correct specification is applied for each welding process and base metal.
The main related standards are A5.17, A5.23, A5.26, and A5.36.
Each covers different product forms, welding processes, or alloy levels.

What is AWS A5.17/A5.17M?

AWS A5.17/A5.17M covers carbon steel electrodes and fluxes for submerged arc welding (SAW).
Submerged arc welding is a high-deposition process in which the arc is struck between the electrode and the workpiece beneath a blanket of granular flux.
Many of the electrode designations used in A5.25, such as the EL, EM, and EH series, follow the same classification conventions established in A5.17.
The two specifications are complementary and are often used on the same fabrication projects for different welding processes.

What is AWS A5.23/A5.23M?

AWS A5.23/A5.23M covers low-alloy and high manganese steel electrodes and fluxes for submerged arc welding.
It extends the A5.17 classification system to higher-strength and alloyed electrode types, including chromium-molybdenum, nickel, and manganese-molybdenum alloy systems.
Some of the electrode classifications in A5.25 may reference or correspond to A5.23 classifications when the alloy content exceeds the carbon steel range.
The two specifications share a similar classification structure, and many products carry dual classifications under both standards when applicable.

What is AWS A5.36/A5.36M?

AWS A5.36/A5.36M is the unified specification for carbon and low-alloy steel flux cored and metal cored electrodes for flux cored arc welding and gas metal arc welding.
It provides an open classification system that allows tensile strength, impact toughness, and chemical composition to be selected independently.
While A5.36 does not directly cover electroslag welding consumables, the metal cored electrode classification concepts share some common elements with the composite metal cored electrode classifications in A5.25.
Verify with the latest edition for current classifications and relationships.

What is ISO 14171 and how does it relate to AWS A5.25?

ISO 14171 is the international standard for solid wire electrodes, tubular cored electrodes, and electrode/flux combinations for submerged arc welding of non-alloy and fine grain steels.
While ISO 14171 addresses submerged arc welding rather than electroslag welding, the electrode classification conventions and the concept of matched electrode-flux combinations are similar.
Many manufacturers produce products that are qualified under both AWS and ISO standards for different welding processes.
The correspondence between A5.25 and ISO standards should be verified with the manufacturer’s datasheet and the latest editions of both standards.


Where Can I Find the Official Complete List of AWS A5.25 / A5.25M Types?

The authoritative source for the complete list of AWS A5.25/A5.25M classifications is the latest edition of the specification itself, available from the American Welding Society at pubs.aws.org or through authorized standards distributors such as ANSI.
The specification includes detailed tables covering chemical composition requirements for solid electrodes and composite metal cored electrodes, mechanical property requirements for flux-electrode combinations, standard electrode sizes, and packaging requirements for every classification.
Manufacturer technical datasheets and welding consumable catalogs also list AWS A5.25 classifications, but these should be cross-referenced against the official specification for accuracy.
Because the 2023 edition represents a significant revision of the previous 1997 edition, always verify with the latest A5.25/A5.25M edition to ensure your electrode and flux selection aligns with the current classification list.

Contact Us

Consult Your Welding Wire Expert

With our experience, innovation, integrity, and professional attitude, we are determined to continuously serve our customers' need and expectations.

      manager@kkweld.com
      0086-18912349999
      Wujin Industrial Zone, Changzhou City, Jiangsu Province
 

Quick Links

Product Categories

Contact Sanzhong Welding
© COPYRIGHT 2026 SANZHONG WELD ALL RIGHTS RESERVED.