Views: 0 Author: Site Editor Publish Time: 2026-11-17 Origin: Site
AWS A5.26/A5.26M does not exist in isolation; several companion specifications provide complementary or overlapping coverage for carbon and low-alloy steel filler metals.
AWS A5.25/A5.25M covers carbon and low-alloy steel electrodes and fluxes for electroslag welding, a process closely related to electrogas welding.
AWS A5.18/A5.18M specifies carbon steel electrodes and rods for gas shielded arc welding.
AWS A5.20/A5.20M addresses carbon steel electrodes for flux cored arc welding, while AWS A5.29/A5.29M covers low-alloy steel electrodes for flux cored arc welding.
AWS A5.28/A5.28M specifies low-alloy steel electrodes for gas shielded arc welding.
AWS A5.36/A5.36M provides a unified classification system for carbon and low-alloy steel flux cored and metal cored electrodes.
For electrogas welding applications involving higher-strength or more highly alloyed steels, AWS A5.23/A5.23M for submerged arc welding electrodes and fluxes may also offer useful comparative requirements.
Consulting these specifications together provides a comprehensive framework for filler metal selection, qualification, and quality assurance.[reference:6][reference:7]
The AWS filler metal classification system is organized by welding process and base metal type, with each specification (A5.x) addressing a distinct process or product form.
AWS A5.26 is part of this hierarchical system and addresses electrogas welding specifically.
The “A5” series covers filler metals for arc welding, and the numbering sequence roughly corresponds to the chronological development of the specifications.
The “/A5.26M” suffix indicates that the specification includes both U.S. Customary Units and SI units, a convention applied to AWS standards that have been harmonized with ISO practices.
Cross-referencing between AWS specifications is common when selecting filler metals for applications that may fall at the boundary between two welding processes.
The AWS A5 Committee on Filler Metals and Allied Materials is responsible for maintaining and revising these specifications.
Users should always confirm that they are working from the most current edition of any AWS specification, as classifications and requirements may be added, revised, or withdrawn between editions.[reference:8]
The AWS A5.26/A5.26M specification establishes classification requirements for solid and tubular electrodes used in electrogas welding.
The classification system uses the prefix “EG” to identify electrogas welding electrodes, followed by a two-digit tensile strength designator, a letter indicating electrode type, and a suffix denoting shielding gas condition or alloy content.
The complete list of classifications covered by the standard is enumerated below.
Because AWS standards are periodically revised, verify the complete and current list with the latest edition.
EG60S-G
EG62S-G
EG70S-G
EG72S-G
In these designations, “S” indicates a solid electrode, and “G” indicates a general classification for which specific chemical composition requirements are established by agreement between the supplier and the purchaser.
EG60T-1
EG60T-2
EG62T-1
EG62T-2
EG70T-1
EG70T-2
EG70T-2C
EG70T-G
EG72T-1
EG72T-2
EG72T-G
EG82T-G
EG82T-NM2
The numeral suffixes “1” and “2” indicate the shielding gas condition: “1” designates 100% CO₂, and “2” designates a mixture of CO₂ and argon.
The “C” in EG70T-2C denotes a specific variation within the “2” category.
The “NM2” designation in EG82T-NM2 indicates a nickel-molybdenum alloy content.
EG60T-3
EG62T-3
EG70T-3
EG72T-3
EG82T-3
The suffix “3” designates self-shielded flux cored electrodes that require no external shielding gas.
Additional alloy-specific classifications may exist within this category; verify with the latest edition.
EG60T-4
EG62T-4
EG70T-4
EG72T-4
The suffix “4” designates composite metal cored electrodes for use with external gas shielding.
Some technical references also list placeholders such as EG43ZT-X, EG48ZT-X, and EG6ZT-X, in which “Z” and “X” represent variable alloy and shielding gas designators.
These may correspond to historical designations or to classifications that are not independently enumerated in the current edition.
For a definitive enumeration of every classification, consult the latest edition of AWS A5.26/A5.26M.
The classifications within AWS A5.26 differ in tensile strength, yield strength, elongation, impact toughness, and chemical composition limits.
The following comparison summarizes the key requirements for representative classifications based on publicly available manufacturer datasheets and standard summaries.
For precise and binding requirements, always refer to the latest edition of the standard.
The tensile strength designator (60, 62, 70, 72, 82) directly correlates to the minimum specified tensile strength in ksi.
For example, EG70T-2 requires a minimum yield strength of 350 MPa (50 ksi), a tensile strength range of 480–650 MPa (70–95 ksi), and a minimum elongation of 22%, with impact toughness of at least 27 J at –20 °C[reference:0].
EG82T-NM2, a higher-strength classification, specifies a minimum yield strength of 410 MPa (60 ksi), a tensile strength range of 550–700 MPa (80–100 ksi), and a minimum elongation of 20%, with impact toughness requirements at lower temperatures[reference:1].
The EG82T-G classification may exhibit a yield strength of 530 MPa, a tensile strength of 625 MPa, an elongation of 26%, and Charpy V-Notch impact energy of 50 J at –46 °C, depending on the manufacturer[reference:2].
These values illustrate the range of mechanical performance available within the specification.
For solid electrodes, the chemical composition requirements apply to the electrode itself, while for tubular electrodes, they apply to the weld metal produced.
The standard specifies limits for carbon, manganese, silicon, phosphorus, sulfur, and various alloying elements depending on the classification.
For EG70T-2, the manganese content is typically limited to a maximum of 2.0%, silicon to 0.90%, phosphorus to 0.03%, sulfur to 0.03%, and molybdenum to 0.35%[reference:3].
EG82T-NM2 specifies a narrower carbon range of 0.2–0.6%, silicon of 1.1–2.1%, and includes nickel and molybdenum as intentional alloying additions[reference:4].
For classifications with the “G” suffix, the chemical composition is not specified by the standard and is instead determined by agreement between the supplier and the purchaser.
The precise chemical composition tables are contained within the standard and should be consulted directly for design and qualification purposes.
The suffix designator indicates the shielding gas condition and electrode type.
The numeral “1” designates 100% CO₂ shielding, while “2” designates a CO₂ and argon mixture.
The numeral “3” designates self-shielded electrodes requiring no external gas, and “4” designates composite metal cored electrodes for use with external gas shielding.
The letter “S” indicates a solid electrode, and “T” indicates a tubular electrode.
The “G” suffix denotes a general classification for which specific requirements are established by agreement.
This systematic designation enables welding professionals to quickly identify the electrode type and shielding gas requirement from the classification code alone.
AWS A5.26/A5.26M does not exist in isolation; several companion specifications provide complementary or overlapping coverage for carbon and low-alloy steel filler metals.
AWS A5.25/A5.25M covers carbon and low-alloy steel electrodes and fluxes for electroslag welding, a process closely related to electrogas welding[reference:5].
AWS A5.18/A5.18M specifies carbon steel electrodes and rods for gas shielded arc welding.
AWS A5.20/A5.20M addresses carbon steel electrodes for flux cored arc welding, while AWS A5.29/A5.29M covers low-alloy steel electrodes for flux cored arc welding.
AWS A5.28/A5.28M specifies low-alloy steel electrodes for gas shielded arc welding.
AWS A5.36/A5.36M provides a unified classification system for carbon and low-alloy steel flux cored and metal cored electrodes.
For electrogas welding applications involving higher-strength or more highly alloyed steels, AWS A5.23/A5.23M for submerged arc welding electrodes and fluxes may also offer useful comparative requirements.
Consulting these specifications together provides a comprehensive framework for filler metal selection, qualification, and quality assurance.
The AWS filler metal classification system is organized by welding process and base metal type, with each specification (A5.x) addressing a distinct process or product form.
AWS A5.26 is part of this hierarchical system and addresses electrogas welding specifically.
The “A5” series covers filler metals for arc welding, and the numbering sequence roughly corresponds to the chronological development of the specifications.
The “/A5.26M” suffix indicates that the specification includes both U.S. Customary Units and SI units, a convention applied to AWS standards that have been harmonized with ISO practices.
Cross-referencing between AWS specifications is common when selecting filler metals for applications that may fall at the boundary between two welding processes.
The AWS A5 Committee on Filler Metals and Allied Materials is responsible for maintaining and revising these specifications.
Users should always confirm that they are working from the most current edition of any AWS specification, as classifications and requirements may be added, revised, or withdrawn between editions.