You are here: Home » News » What is the complete list of AWS A5.27 / A5.27M types?

What is the complete list of AWS A5.27 / A5.27M types?

Views: 0     Author: Site Editor     Publish Time: 2026-11-14      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

AWS A5.27/A5.27M does not exist in isolation; several companion specifications provide complementary or overlapping coverage for carbon and low-alloy steel filler metals.
AWS A5.18/A5.18M is the primary specification for carbon steel electrodes and rods for gas shielded arc welding and covers many of the same solid wire classifications.
AWS A5.20/A5.20M addresses carbon steel electrodes for flux cored arc welding, while AWS A5.29/A5.29M covers low-alloy steel electrodes for flux cored arc welding.
AWS A5.28/A5.28M specifies low-alloy steel electrodes for gas shielded arc welding.
AWS A5.36/A5.36M provides a unified classification system for carbon and low-alloy steel flux cored and metal cored electrodes.
For applications involving copper and copper alloy filler metals, AWS A5.7/A5.7M and AWS A5.8/A5.8M are the appropriate specifications.
The ASME Boiler and Pressure Vessel Code, Section II, Part C, adopts AWS filler metal specifications as SFA specifications; users should confirm the corresponding SFA edition for their application.
Consulting these specifications together provides a comprehensive framework for filler metal selection, qualification, and quality assurance.

How does AWS A5.27 relate to the broader AWS filler metal classification system?

The AWS filler metal classification system is organized by welding process and base metal type, with each specification (A5.x) addressing a distinct process or product form.
AWS A5.27 is part of this hierarchical system and addresses carbon steel electrodes and rods for gas shielded arc welding.
The “A5” series covers filler metals for arc welding, and the numbering sequence roughly corresponds to the chronological development of the specifications.
The “/A5.27M” suffix indicates that the specification includes both U.S. Customary Units and SI units, a convention applied to AWS standards that have been harmonized with ISO practices.
A potential source of confusion arises from the fact that the “A5.27” designation was historically associated with a copper alloy oxyfuel gas welding rod specification before being reassigned to the carbon steel gas shielded arc welding specification.
This history explains why some databases and procurement records still reference copper alloy designations under the A5.27 label.
Users should always confirm that they are working from the most current edition of any AWS specification, as classifications and requirements may be added, revised, or withdrawn between editions.
Verify the current edition number and any superseded designations with the latest edition of AWS A5.27/A5.27M.

What is the complete list of carbon steel electrode and rod classifications under AWS A5.27 / A5.27M and AWS A5.18 / A5.18M?

The AWS A5.27/A5.27M and AWS A5.18/A5.18M specifications together cover carbon steel electrodes and rods for gas shielded arc welding.
AWS A5.27/A5.27M prescribes requirements for solid and composite carbon steel electrodes and rods.
AWS A5.18/A5.18M is the primary specification for carbon steel electrodes and rods for gas shielded arc welding, covering solid, composite stranded, and composite metal cored electrodes.
Classification is based on the chemical composition of the electrode for solid electrodes and rods, and on the chemical composition and mechanical properties of the weld metal for composite types.
The classifications covered by these specifications are enumerated below by category.
Because AWS standards are periodically revised, verify the complete and current list with the latest edition.

Solid electrode and rod classifications (ER designator)

ER70S-2
ER70S-3
ER70S-6
ER70S-7
ER70S-G
These classifications follow the AWS designation system for solid carbon steel electrodes and rods.
The “ER” prefix indicates that the filler metal is suitable for both electrode and rod applications.
The “70” designates a minimum tensile strength of 70,000 psi (approximately 480 MPa).
The “S” indicates a solid wire or rod, and the final numeral or letter designates specific chemical composition requirements.
ER70S-2 contains higher levels of deoxidizers such as titanium and zirconium, making it suitable for welding on rusty or dirty surfaces.
ER70S-3 has lower deoxidizer content and is better suited for clean surfaces.
ER70S-6 contains higher manganese and silicon for improved wetting and bead appearance.
ER70S-7 provides better wetting and bead appearance than ER70S-3.
Additional classifications within this family may be covered by the specification; verify with the latest edition.

Composite electrode classifications (E designator)

E70C-6M
E70C-6C
E70C-G
These classifications designate composite carbon steel electrodes, including metal cored types, for gas shielded arc welding.
The “E” prefix indicates an electrode, and “70” designates a minimum tensile strength of 70,000 psi.
The “C” indicates a composite electrode, and the final suffix specifies the shielding gas type or, in the case of “G,” indicates that requirements are established by agreement between supplier and purchaser.
E70C-6M is designed for use with a mixed shielding gas, while E70C-6C is intended for use with 100% CO₂ shielding.
Additional composite classifications may exist; verify with the latest edition.

What is the complete list of copper and copper-alloy electrode and rod classifications?

Copper and copper-alloy filler metals are covered by two distinct AWS specifications depending on the intended welding or brazing process.
AWS A5.7/A5.7M prescribes classification requirements for copper and copper-alloy bare welding rods and electrodes used in gas metal arc, gas tungsten arc, and plasma arc welding.
AWS A5.8/A5.8M prescribes classification requirements for brazing filler metals, including copper-phosphorus and copper-zinc brazing rods.
Classification for both specifications is based on the chemical composition of the filler metal.
The classifications covered by these specifications are enumerated below.
Verify the complete and current list with the latest edition.

Copper and copper-alloy welding electrodes and rods (AWS A5.7 / A5.7M)

ERCu
ERCuSi-A
ERCuSn-A
ERCuSn-C
ERCuNi
ERCuNiAl
ERCuMnNiAl
ERCuAl-A1
ERCuAl-A2
ERCuAl-A3
ERCuZn-A
ERCuZn-B
These classifications designate copper and copper-alloy bare welding electrodes and rods for gas shielded arc welding processes.
The “ER” prefix indicates suitability for both electrode and rod applications.
The chemical symbol following “Cu” designates the primary alloying element: Si for silicon, Sn for tin, Ni for nickel, Al for aluminum, Mn for manganese, and Zn for zinc.
ERCuSi-A is a silicon bronze filler metal commonly used for MIG brazing of steel and for welding copper alloys.
ERCuAl-A2 is an aluminum bronze filler metal with good wear resistance.
Additional classifications within this family may be covered by the specification; verify with the latest edition.

Copper-phosphorus and copper-zinc brazing filler metal classifications (AWS A5.8 / A5.8M)

BCuP-1
BCuP-2
BCuP-3
BCuP-4
BCuP-5
BCuP-6
BCuP-7
BCuP-8
BCuP-9
RBCuZn-A
RBCuZn-B
RBCuZn-C
RBCuZn-D
These classifications designate copper-based brazing filler metals.
The “BCuP” prefix indicates a copper-phosphorus brazing filler metal, which is primarily used for joining copper and copper alloys without the need for additional flux when used on copper.
The “RBCuZn” prefix indicates a copper-zinc brazing rod, commonly used for braze welding of steels and cast irons.
RBCuZn-C is a manganese bronze brazing rod, while RBCuZn-D is a nickel-bronze brazing rod.
These designations appear in AWS A5.8/A5.8M and have historically been associated with the legacy AWS A5.27 designation for copper alloy rods.
Additional classifications within this family may be covered by the specification; verify with the latest edition.

How do the designators in these classifications signify chemical and mechanical requirements?

The AWS classification system for carbon steel and copper alloy filler metals follows a structured designation logic.
The prefix letters indicate the product form and intended application: “ER” denotes a filler metal usable as both electrode and rod, “E” denotes an electrode, “R” denotes a rod, “B” denotes brazing filler metal, and “RB” denotes a brazing rod.
The two-digit tensile strength designator, when present, indicates the minimum tensile strength of the deposited weld metal in thousands of pounds per square inch.
The letter following the tensile strength designator indicates the product type: “S” for solid, “C” for composite, and “T” for tubular.
The final designator, a numeral or letter, specifies the chemical composition requirements, shielding gas type, or, in the case of “G” classifications, indicates that the requirements are established by agreement between supplier and purchaser.
This systematic designation enables welding professionals to identify the filler metal type, strength level, and intended application from the classification code alone.

What are the mechanical property requirements for carbon steel filler metals?

The mechanical property requirements for AWS A5.27 and A5.18 carbon steel filler metals include minimum tensile strength, minimum yield strength, minimum elongation, and where applicable, Charpy V-notch impact toughness.
The tensile strength designator in the classification directly correlates to the minimum specified tensile strength.
For classifications with a “70” designator, the minimum tensile strength is 70,000 psi (480 MPa), with typical yield strength requirements of 58,000 psi (400 MPa) and a minimum elongation of 22%.
ER70S-2, ER70S-3, and ER70S-6 all meet these minimum mechanical properties, though they differ in chemical composition and intended application.
Impact toughness requirements vary by classification and may be specified at temperatures such as –20 °C, –29 °C, or –40 °C.
The precise mechanical property tables are contained within the respective standards and should be consulted directly for design and qualification purposes.
Verify all mechanical property requirements with the latest edition.

What are the chemical composition requirements for copper alloy filler metals?

For copper and copper-alloy filler metals classified under AWS A5.7/A5.7M and AWS A5.8/A5.8M, the chemical composition requirements apply directly to the filler metal.
ERCuSi-A is a silicon bronze containing approximately 3% silicon and 1% manganese, with the balance being copper.
ERCuAl-A2 is an aluminum bronze containing approximately 9–11% aluminum and 1–2% iron.
RBCuZn-C is a manganese bronze brazing rod containing approximately 46–50% copper, with zinc as the balance and additions of tin and manganese.
RBCuZn-D is a nickel-bronze brazing rod containing approximately 46–50% copper, with nickel and zinc as the primary alloying additions.
The precise chemical composition tables are contained within the respective standards and should be consulted directly for design and qualification purposes.
Verify all compositional requirements with the latest edition of the relevant specification.

AWS A5.27/A5.27M and AWS A5.18/A5.18M for carbon steel filler metals and AWS A5.7/A5.7M and AWS A5.8/A5.8M for copper alloy filler metals do not exist in isolation.
Several companion specifications provide complementary or overlapping coverage for these filler metal categories.
AWS A5.20/A5.20M addresses carbon steel electrodes for flux cored arc welding.
AWS A5.29/A5.29M covers low-alloy steel electrodes for flux cored arc welding.
AWS A5.28/A5.28M specifies low-alloy steel electrodes and rods for gas shielded arc welding, including classifications such as ER80S-B2, ER90S-B3, and ER110S-G.
AWS A5.36/A5.36M provides a unified classification system for carbon and low-alloy steel flux cored and metal cored electrodes.
For copper alloy applications involving shielded metal arc welding rather than gas shielded processes, AWS A5.6/A5.6M is the appropriate specification.
The ASME Boiler and Pressure Vessel Code, Section II, Part C, adopts AWS filler metal specifications as SFA specifications; users should confirm the corresponding SFA edition for their application.
Consulting these specifications together provides a comprehensive framework for filler metal selection, qualification, and quality assurance.

How do these specifications relate to the broader AWS filler metal classification system?

The AWS filler metal classification system is organized by welding process and base metal type, with each specification (A5.x) addressing a distinct process or product form.
AWS A5.18 is the primary specification for carbon steel electrodes and rods for gas shielded arc welding.
AWS A5.27 addresses the same product category and is closely related to A5.18.
AWS A5.7 covers copper and copper-alloy bare welding rods and electrodes for gas shielded processes.
AWS A5.8 covers brazing filler metals, including copper-phosphorus and copper-zinc brazing rods.
The “A5” series covers filler metals for arc welding and related processes, and the numbering sequence roughly corresponds to the chronological development of the specifications.
The “/A5.xxM” suffix indicates that the specification includes both U.S. Customary Units and SI units, a convention applied to AWS standards that have been harmonized with ISO practices.
Users should always confirm that they are working from the most current edition of any AWS specification, as classifications and requirements may be added, revised, or withdrawn between editions.

Contact Us

Consult Your Welding Wire Expert

With our experience, innovation, integrity, and professional attitude, we are determined to continuously serve our customers' need and expectations.

      manager@kkweld.com
      0086-18912349999
      Wujin Industrial Zone, Changzhou City, Jiangsu Province
 

Quick Links

Product Categories

Contact Sanzhong Welding
© COPYRIGHT 2026 SANZHONG WELD ALL RIGHTS RESERVED.